This is a 90-91 Prelude A/C compressor that came off of a ~50k miles JDM B21A. It is in good condition overall with some light surface corrosion.
It was working fine before being pulled (for engine swap). It was still running as an original R12 system.
The fluid in the compressor was drained into the container (pictured) and is clean.
The part of the electrical connector that attaches to a mounting bracket is paritally broken (see picture).
----
Being sold AS-IS, no warrany.
If you are replacing a failed compressor you must completely flush every other component of the system before installing the replacement compressor. Failure to do so will allow any existing debris in the system to run through the replacement compressor and kill it fast.
Here is a video showing how to flush the system components:
https://youtu.be/b_3iHUP6kh0
----
If you want to use this in a 88-89 you will also need the following components:
- 90-91 AC / Alternator compressor block bracket
- Both 90-91 AC Lines that attach to the compressor
