Fits: 88-91 Prelude (B-series swap, not including AWD)
These are aftermarket Integra shifter rods we lengthen/modify to work with your B-Series engine swap.
The basic OE style included u-joint uses plastic bushings which have some slight slop.
If you want to eliminate this then there is an upgrade option to replace the OE style u-joint with a no-slop solid u-joint:
NOTE: These are shifting rods only, the shifter and related hardware is not included. These are not used in B-series AWD swaps.
INSTALL INSTRUCTIONS: Prelude_Engineering_LLC_B-Series_Shifter_Rods_Instructions.pdf
