B-Series Engine Swap Brackets (V2)

Prelude Engineering LLC

$535.00
(No reviews yet) Write a Review
Availability:
MADE TO ORDER. Production time: Up to 8-10 weeks
Adding to cart… The item has been added

Fits: 88-91 Prelude

(New V2 version now includes the bolts)


These engine swap brackets allow you to swap a “regular” B-series engine and transmission into your 3g Prelude.

These are “swap brackets” not “swap mounts”. They bolt onto the regular B-series engine and allow you to use the stock 3G Prelude manual transmission engine mounts to mount the whole assembly in the bay.

The benefit of this is the possibility of having a low-vibration engine swap using the stock rubber mounts. If you want extra control then you can fill the stock mounts with window weld or polyurethane as needed.

A traction bar is not required for this swap unless you want to run AC. In that case you will need a traction bar to have clearance for the AC compressor.

 

Front Mount Bracket Option: If you are running polyurethane side and rear mounts then running a front mount is not strictly required. If you are going to use OE rubber mounts then the front bracket is strongly recommended. If you are going to use a Prelude Engineering traction bar please select "No", you can select the B-series torque rod front bracket on the traction bar store page.

Compatible with:
Engines: B16, B17, B18, B20B, B20Z (VTEC and non-VTEC heads)
Transmissions: Any B-series hydraulic clutch transmission (CRV AWD transmission (SXBM) not included)



Install Instructions: https://prelude3g.com/share/Prelude-Engineering-B-Series-Swap-Notes.pdf

 

B-Series Swap Related Products:
B-Series Swap Shifter Rods

Traction Bar

Engine Swap AC lines - B / H series

AC Compressor Control Unit Bypass Plug and Play Kit

Engine Swap Hybrid Power Steering Line Service

Cruise Control Actuator Relocation Kit

Fan Timer Unit Bypass Plug and Play Harness