Fits: 88-91 Prelude (Left-hand drive only)
This is a mount for a specific battery:
Antigravity Batteries ATX20-RS Lithium-Ion battery
(Battery not included with this mount!)
Switching to the ATX20 and this mount is saves roughly 34lbs compared to the OE battery and tray.
This mount comes with a heat shield to protect the battery from the K-series header heat. The battery is mounted below the location of the OE "vacuum box". The top tie-down has an access hole that allows you to push the RE-START button on the battery.
This mount may require relocating some OE items, see the install instructions below for details.
Options:
- Battery Cables: These are new positive and negative battery cables made just for this mount/battery. Saves you the trouble of having to make your own.
The wire is pure copper, fully annealed, with EPDM insulation. The outer sleeve is flame retardant, cut/abrasion resistant, and chemical resistant.
Please see the install instructions below for more details about these options.
Install Instructions: Prelude_Engineering_LLC_ATX20-RS_Battery_Mount_Instructions.pdf
