Fits: 88-91 Prelude K-Swaps
The factory heater valve bracket causes the valve port to point at the header when used with K-swaps. This requires using a 135° hose on the outlet to point the hose away from the header.
This new bracket reorients the heater valve to point towards the heater hose connection on the K-series engine. This keeps the hose away from the header and also results in a much cleaner look.
For your convenience this bracket also comes with a pre-cut 45° 5/8" silicone hose that connects the heater core to the heater valve.
Installation requires bending the fuel supply hard line for extra clearance, please see the instructions below for full details.
Installation Instructions: Prelude_Engineering_LLC_K-Series_Swap_Heater_Valve_Relocation_Bracket.pdf
