Fits: 88-91 Prelude (USDM Only)
USDM 3rd gen Preludes came with a seat belt warning light and buzzer that is mounted at the rear view mirror (to comply with US regulations at the time). The plastic Honda used for this part is low quality and breaks easily. It is a common "mod" for owners to unplug the connector to disable the annoying warning functionality as well. Unfortunately if you remove the OE part then you will be left with a visible hole in the headliner and exposed holes/screws on the rear view mirror.
Prelude Engineering is now offering this full delete setup for USDM Preludes. It comes with a new trim panel that covers up the headliner hole (aka. buzzer delete panel) as well as a cap for the rear view mirror base to give it a finished look.
These are 3D printed parts made of black colored ASA. The finish will be raw from the printer. You can expect visible layer lines, small blemishes, etc. Typical of 3D printed parts:
They can be installed as-is or the buyer can sand and paint match the parts if a more OE look is desired.
Install Instructions: Prelude_Engineering_LLC_88-91_Prelude_USDM_Rear_View_Mirror_Buzzer_Delete_Install_Instructions.pdf
